“Delivery for a favorite client.” A short-haul freight truck in downtown Petersburg, August 8, 2018. Photo by the Russian Reader
Officials Want to Equip New Trucks with Special Sensors as of 2024
Carriers Are Worried Tightening Monitoring Weight and Size of Trucks Will Increase Load on Business
Elizaveta Bazanova and Vladimir Shtanov
December 24, 2018
Officials have concocted a new way to monitor business. They want to equip trucks with axial-load sensors in order to combat trucks hauling loads in excess of legal weights. Legislation requiring such loads be transported by trucks weighing over 3.5 tons will be drafted by 2024. The plan is contained in the outline of the Russian government’s national Safe and High-Quality Highways project, two federal officials told Vedomosti. A spokesperson for Deputy Prime Minister Maxim Akimov said the project’s outline would be approved by the cabinet on Monday.
The Industry and Trade Ministry and the Transportation Ministry would have until 2022 to draft amendments to the technical regulations of the Eurasian Customs Union (EACU), forbidding the import to Russia of trucks not equipped with the sensors. The amendments should also be inserted into Russian technical regulations before 2024, according to the national highway project’s outline. (Vedomosti has seen part of this document.) As of 2024, all new trucks will have to be equipped by manufacturers with the sensors, explained Akimov’s spokesperson. Owners of old trucks will not be forced to install them. They will have the option of installing them, says a source who has learned about the plans from a federal official.
Regulations on equipping all Russian trucks weighing more than 3.5 tons with axial-load sensors have not yet been drafted, according to spokespeople at the Transport Ministry and Rosavtodor (Russian Federal Road Agency).
Russian authorities set about establishing weight-and-size monitoring system for freight trucks in 2016. Their goal is to maintain the quality of roads and reduce the number of accidents. Automatic scales that measure the axial load of trucks have been installed on highways in test regions. If a truck is overweight, the carrier must pay a fine of up to 450,000 rubles [approx. 5,800 euros]. A total of twenty-seven checkpoints in eighteen Russian regions have been set up on federal highways. By 2024, the number of checkpoints should rise to 387, covering federal and regional highways in seventy-five regions.
The pilot program in Vologda Region has shown the average overload is thirty percent, the Transport Ministry reported. During their first year of operation, the checkpoints reduced the number of violators from forty percent to four percent. On the federal level, the weight-and-size monitoring system will be a public-private partnership. RT Invest Transport Systems, owned by Igor Rotenberg, son of Arkady Rotenberg, and RT Invest, jointly owned by Rostec and Andrei Shipelov, has shown interest in acquiring an operating license. In June 2018, the company proposed a public-private partnership with the government.
The regions will establish their own public-private partnerships. Truck owners will be able to purchase the sensors from any manufacturer. No directives will be issued on this score, a federal official assured us.
3.74 million trucks were registered in Russia as of July 1, reports Autostat. Under the European classification, trucks weighing between 3.5 tons to 12 tons are categorized as N2. Such trucks are manufactured by KAMAZ, Iveco, Mercedes-Benz, and Renault (Midlum), among other companies. They are usually employed for short hauls, for example, from a distribution center to retail outlets, a logistics manager from a company in the consumer sector told us.
Currently, truck owners rarely install the sensors, said Boris Rybak, director general of Infomost, because equipping a truck costs owners between several tens of thousands to several hundreds of thousands of rubles. Trucks manufactured in the west that carry goods in Russia usually have the sensors pre-installed.
Alexander Lashkevich, director for relations with industrial and infrastructure organizations at the Business Lines Group, said they did not install additional sensors, since they are a standard feature on most imported vehicles, but this applies to trucks with a capacity of more than 12 tons. The new K5 line of trucks from KAMAZ features axial-load sensors as a standard feature, said a company spokesperson. Lashkevich said Business Lines used special calculators that facilitate loading semitrailers so as to avoid overloading.
Introducing weight and size monitoring will help maintain roads, but it is not clear why small-tonnage vehicles need to be equipped with axial-load sensors. Problems with overloaded axles happen to heavy haul vehicles. Ultimately, the load on the shipping business will grow, while the expediency of the planned measures is difficult to assess, warned Lashkevich.
The sensors are not needed on low-tonnage trucks. Problems with excess weight “occur extremely rarely due to the specifics of moving people’s things to new residences,” explained Arkady Usachov, director general of Gentle Move, a moving company.
The damage to roads caused by trucks weighing under 12 tons is considerably less, said Rybak, but equipping even light trucks with the sensors is a worldwide trend: you can load even a 3.5 ton truck with up to ten tons of freight. Such systems are in operation on roads in many countries, agreed Mikhail Blinkin, director of the Institute of Transport Economics and Transport Policy Studies at the Higher School of Economics.
The cost of buying and operating trucks could increase, warned Usachov.
“Freight haulage should be getting cheaper, but this approach will only make it more expensive,” argued Alexander Prokofiev, head of operations at the Moving Center. “Plato, ERA-GLONASS, and other systems will not provide real security, and they will not improve road quality. The amount of freight hauled on the roads will not decrease. Roads have to be built well from the get-go.”
Translated by the Russian Reader